DYNACORD C1800FDI Rackmount 2x950w DSP Install Power Amplifier

 C1800FDI  DYNACORD 

 2x950w DSP Installation Power Amplifier 

Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal processing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.

Features:

• Professional DSP amplifier for live and mobile application

• Fully integrated professional speaker processing with FIR drive technology

• Market-leading acoustic performance and rock-solid reliability

• Intuitive, simplified set-up, control and operation in SONICUE sound system software with firmware 2.0

• Signal Processing: FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance

• Remote Control: SONICUE sound system software **

Specifications:

• Load Impedance: 2 Ω,  2.6

• Maximum Output Power, Single Channel: 1600 W, 1300 W

• Maximum Output Power, Dual Channel: 1400 W, 1200 W

• Direct Drive: 70 V Operation

• Load Capability: 2 x 1250 W (-1.5 dB)

• Dual Channel Bridged: Not Recommended

• Maximum RMS Voltage Swing THD = 1%, 1 kHz: 65.1 V

• Voltage Gain Ref.1 kHz: 32.0 dB

• THD at 600 W/4 ΩMBW = 80 kHz, 1kHz: < 0.05%

• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%

• DIM30, 3.15 kHz, 15 kHz: < 0.05%

• Maximum Input Level: +21 dBu

• Crosstalk ref. 1 kHz, at 100W/4 Ω: < -80 dB

• Frequency Response, ref. 1 kHz: 20 k Ω

• Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω: > 105 dB

• Output Noise, A-weighted: < -68 dBu

• Output Stage Topology: Class AB

• Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)

• Power Consumption ⅛ Maximum Output Power @ 4 Ω: 700 W

• Mains Fuse: 240 V/230 V: T12AH; 120 V/100 V: T25AH

• Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay

• Cooling: Front-to-rear, 3-stage-fans

• Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)

• Safety Class: I

• Color: Black

• Dimensions (W x H x D), mm: 483 x 88 x 462.4

• Weight: 15.2 kg (33.5 lb)

SALE: $1299.99

FREE S&H in continental US (e-mail for international / offshore USA rates)