ENTTEC OCTO DIN ETHERGATE POE 8 Universe eDMX to DMX Converter Interface

 OCTO  ENTTEC 

 8 Universe eDMX to DMX Converter Interface 

ENTTEC’s OCTO is a robust and reliable installation grade LED controller engineered to take any architectural, commercial or entertainment project to the next level.

With 8 universes of eDMX to pixel protocol conversion and network chaining between devices, the OCTO allows for fast deployment of LED strips and pixel dot systems compatible with a wide range of devices.

The OCTO is packed with installer-friendly features such as an identify button to check correct wiring, temperature monitoring, a wide input voltage range and intuitive configuration and management through its localhost web interface. All contained within a 4 DIN unit form factor.

The inbuilt Fx engine allows users to edit and create presets, using the OCTO’s web interface that can be configured to run standalone at power up

Includes:

• OCTO

• TS35 DIN Clip & 2 (Please note: the OCTO is not provided with a power supply.) Torque T10 self-tapping screw

• ‘Read Me’ card

Features:

• Two * 4-universe pixel outputs with Data and Clock support.

• Support for up to 8 universes of Art-Net, sACN, KiNet and ESP.

• DIN Rail mount (attached)

• 2-pin Terminal connector for power input

• Each Plink output can be mapped to 2 Ethernet Universes.

• 16 Universe Ethernet to Plink

• Control a maximum of 2,720 RGB pixels

• Easy to configure through any web browser

• DHCP or Static IP address support.

• Multiple pixel protocols support: Art-Net 1/2/3, Streaming ACN (sACN), Kling-net, ESP

• Surface or TS35 DIN rail mounting option

• Intuitive device configuration and updates through the inbuilt web interface.

• Test/Reset button allows installers to quickly check wiring is correct without requiring a network connection.

• Simple Fx generator mode to create and execute preset effects on the fly, configurable to play from power up.

• Grouping functionality to reduce input channel count

Specifications:

• 8 universe eDMX to LED pixel controller with network chaining in a compact 4-module DIN-rail form factor
• 2* Network (RJ45)
• 2* SPI Output (4-Pin phoenix) connector
• 1* Power (2-Pin phoenix) connector
• LED indicators: Forward facing LED indicator, Network link / activity (integrated into RJ45 ports)
• eDMX Input Protocol: Art-Net, sACN, Kling-net, ESP
• Data output type: SPI (NZR) See website for all supported protocols
• Max. eDMX -> pixel conversion per device: 2048 channels
• Max. pixels controllable per device: RGB 1360 (680 per port), RGBW 1024 (512 per port)
• Max. Refresh Rate 46 frames per second (fps)
• Network Speed: 10/100Base-T
• Network Discovery: ENTTEC’s NMU software
• Network configuration: Static (Default 192.168.0.10) / DHCP
• Integrated network switch
• Recommended network device quantity per chain: Chains of up to 8 devices give optimum synchronization between outputs
• Max. network device quantity per chain: 50
• Identify/Reset button
• Configurable pixel color ordering
• Creation of effects and presets on the device
• Play preset upon startup
• Firmware Updates: Upgradable via web interface
• Insulation Rating: IP20
• Environmental Operating Temperature : -4°F to 122°F (-20°C to 50°C)
• Environmental Operating Humidity: 5 to 95% (non-condensing)
• Cooling Method: Convection
• Current Draw: 9vDC 400 mA, 48vDC 75 mAPower Consumption: 5 W (Max.)
• Max. heat dissipation 4.5
• Power Input: 4-60vDC
• Size: 3.96" L x 3.07" W x 1.46" H (100.5 x 77.9 x 37.1 mm)
• Weight: 0.11 kgs/0.24 lbs
• Material: ABS plastic
• Mounting Options: Surface mount, TS35 DIN Rail mount

SALE: $329.99

FREE S&H in continental US (e-mail for international / offshore USA rates)