VERTUS CLA FBT
2200w Total Peak Line Array PA Speaker System
The FBT Vertus CLA 208SA is a 600W RMS active subwoofer with two 8" custom neodymium woofers in a bass-reflex design. It can be used to extend the low frequency response to a wide range of FBT speaker systems for applications such as live stage, theater, houses of worship, DJ setups, and more.
The Vertus CLA 208SA has several other features such as a frequency response of 50 to 180 Hz and a 600W class D power amplifier that uses a switch mode power supply. It's built-in digital signal processor has 4 available frequency presets allowing the sub to be configured to any speaker.
The Vertus CLA 208SA 15 mm birch-plywood enclosure, which has an anti-scratch paint finish, features a control-panel that has stereo combo XLR/jack inputs, a link jack, an XLR Hi-pass stereo out jack, along with volume, preset settings, 0 to 180° phase switch, and status LED indicators on the rear panel. Also built into the enclosure are 2 integrated carry handles and a M20 stand adapter. Power is supplied using a Neutrik Powerconn input and link jack or the included AC power cable.
Includes:
-
1 x FBT Vertus CLA-208SA Subwoofer
-
1 x FBT Vertus CLA-604A Line-Array Speaker
-
1 x FBT VT-SC59-604 Dummy Stand
VERTUS CLA-208SA
-
Configuration: 1 way
-
Built-in amplifier LF/HF: 600 W RMS
-
Built-in amplifier peak LF/HF: 1200 W
-
Frequency response: 50Hz - 180Hz -6dB
-
Low Frequency woofer: 2 x 8\" - 2\" coil inch
-
Maximum SPL cont/peak: 125/129 half space dB
-
Dispersion: Omnidirectional HxV
-
Input impedance: 22 Kohm
-
Crossover Frequency: 0.15 KHz
-
AC Power requirements: 450 VA
-
Input connector: stereo XLR with loop, HP out
-
Power cord: 5 m/ft
-
Net Dimension: 550x270x500 mm/inch
-
Net Weight: 20 / 16.4 kg/lb
-
Transport Dimension: 690x370x625 / 21.7x10.6x19.7 mm/inch
-
Transport Weight: 23.5 / 51.80 Kg/lb
VERTUS CLA 604A
-
Built-in amplifier LF/HF: 400/100 W RMS
-
Built-in amplifier peak LF/HF: 800/200 W
-
Frequency response: 130Hz- 20kHz -6dB
-
Low frequency woofer: 6 x 4\" - 1\" coil inch
-
High frequency driver: 4 x 1\" - 1\" coil inch
-
Maximum SPL cont/peak: 122/125 dB
-
Dispersion: 100° x 20° H x V
-
Input impedance: 22 Kohm
-
Crossover frequency: 2.5 KHz
-
Ac power requirements: 450 VA
-
Input connector: XLR with loop
-
Power cord: 5 mm/inch
-
Net Dimension: 130x841x130 / 5.12x33.1x5.12 mm/inch
-
Net weight: 9 / 19.84 kg/lb
-
Transport Dimension: 220x930x220 / 8.66x36.61x8.66 mm/inch
-
Transport weight: 11.5 / 25.35 kg/lb
VT-SC59-604
-
Dummy Stand
SALE: $3307.00
FREE S&H in continental US (e-mail for international / offshore USA rates)