FURMAN CN-1800S 9 Outlet Rackmount Smart Sequencing Power Conditioner

 CN-1800S  FURMAN 

 Rackmount Smart Sequencing Power Conditioner 

Designed specifically for Commercial A/V Installers, the Furman CN-1800S SmartSequencer™ merges robust control capabilities via SmartSequencing™ Technology with advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT® Remote Power and Energy Management Platform (BB-RS232 adapter required, sold separately).

The CN-1800S is one of the first products to feature Furman’s SmartSequencing™ technology, enabling large and complex A/V systems to be powered on and off safely with a simple button press or turn of a key, even by nontechnical personnel. SmartSequencing's bidirectional communications between installed units allows a primary unit to control and sequence multiple secondary units, ensuring that multizone electronic systems are powered on and off safely and dependably from a single point of control across an entire installation. Units can be connected via current loop at runs of more than 1,000 feet with backwards compatibility with Furman’s legacy sequencers.

Additionally, it provides robust control options, and is equipped with RS-232 ports and command sets for integration with control systems. An optional RS-232-to-Ethernet adapter (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman's BlueBOLT®-hosted remote power and energy management platform.

Furman CN-1800S Features:

• Surge Protection: Series Multi-Stage Protection (SMP) Technology provides the highest level of surge & spike protection available

• Noise Filtration: Linear Filtration Technology (LiFT)reduces AC noise linearly across a very wide bandwidth for unequaled audio& video clarity

• Voltage Protection: Extreme Voltage Shutdown (EVS)circuity safely powers down itself and connected equipment during unsafevoltage periods.

• SmartSequencing™: SmartSequencing allows bidirectional,safe sequenced power up/down operations via the push of a button or turn of akey

• Diagnostic Lights: Diagnostic lights provide valuablesystem information including power quality, “Protectection Ok” indicator, andExtreme Voltage indicator

• 15 Amp Output Current: 15 amp maximum current capacitywith incorporated 15 amp thermal circuit breaker

• Remote Access (RS-232): RS-232 compatibility &command set provide integration with control systems, open source and controlprogramming

• BlueBOLT Compatible®: BlueBOLT provides remote accessto reboot components, power equipemnt on/off, and monitor power quality viathe internet from anywhere in the world

• Nine Total Outlets: The CN-1800S contains eight (8)rear panel NEMA 5-15R outlets and one (1) front panel NEMA 5-15R outlet

Furman CN-1800S Specifications:

• AC Voltage Input Range: 90-139VAC, 50/60Hz

• Maximum AC Current Rating: 15 amps (Thermal breaker)

• AC Cord: 3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug

AC Receptacles

• Rear Panel Outlets: 2 Unswitched NEMA 5 15R’s (1 duplex), 6 Sequenced NEMA 5-15R’s (3 duplexes -each controlled by separate relay)

• Front Panel: One NEMA 5-15R Convenience Outlet, Unswitched

Surge/Under-Overvoltage Protection

• AC Surge Protection: SMP

• Spike Protection Mode: Line to neutral, zero ground leakage

• Spike Clamping Voltage: 188VAC peak @ 6,000 volts/3,000 amps

• Response Time: 1 nanosecond

• Maximum Surge Current: 6,500 Amps

• AC Undervoltage Protection: EVS, 77VAC+/-3VAC

• AC Overvoltage Protection: EVS, 145VAC+/-5VAC

• AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)

AC Filtering

• LiFT

• Noise Attenuation: Linear, 10dB @10KHz, 40dB @100KHz, 50dB@500KHz

Operating Environment

• Operating Temperature Range: 40° F to 105°F (5° C to 40°C)

• Humidity Range: <90% rH (Relative Humidity)

User Interface

• Key-switch: Front panel, 3-position key-switch (On, Off, Remote)

• Keys: Included, 1 pair

• Push-button Switch: Front panel, hidden by security cover

• Circuit Breaker: Front panel, push-button, 15A Thermal Breaker

• Front panel diagnostic indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage

• Front Panel DIP Switches: Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual

• Potentiometer: Front panel, hidden by security cover, fine tune delay adjust

Control/Status/Triggering (Rear Panel)

• Remote Terminal: +5-30VDC In, 12VDC (12mA) Out

• SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000ft nominal)

• Remote Terminal: Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)

• Force Off/Delay 3 Terminal: Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)

• RS-232 Compatible: Yes, DB-9 Connector

• IP Addressability: Optional, via BB-RS232 Ethernet/RS-232 Adapter (sold separately) for IP control via Telnet, HTTP, BlueBOLT®

• Voltmeter: Available with RS-232/Ethernet option, ± 2VAC accuracy (sold separately)

• Ammeter: Available with RS-232/Ethernet option, ±1A accuracy (sold separately)

• Power Consumption (No Load): 10 Watts

• Safety Agency: NRTL-C, RoHS Compliant

SALE: $799.95 

FREE S&H in continental US (e-mail for international / offshore USA rates)