HUGHES & KETTNER ERA 1 ACOUSTIC COMBO WOOD Guitar Amp with 8" Speaker and FX

 ERA 1 ACOUSTIC COMBO AMP WOOD  HUGHES & KETTNER 

 4 Channel Guitar Amp with 8" Speaker and Internal FX 

Welcome to a new era of acoustic amplification. Developed with renowned designer Michael Eisenmann, era 1 gives you richly detailed definition for peerless authenticity and tonal brilliance, plus a bunch of remarkably innovative and intuitive features to make every performance better. On top of all this, era 1 is built in Germany to the highest quality standards.

High-definition audio

• Painstakingly selected, top-drawer components

• Excellent preamps

• Premium-quality AD/DA converters

• Custom-made power amp with massive headroom 

• Richly detailed definition, wonderfully dynamic response, plenty of headroom—it all adds up to a natural-sounding audio experience unrivaled in authenticity 

Intuitive handling with zero compromises

• Two fully featured, identical channels

• Independent FX engine for each channel with 16 programs

• Very effective Preshape and Mode buttons to voice channels to suit different instruments and vocal registers

• As compact and light as conventional 60-watt combos 

Superior quality

• Developed by renowned acoustic amp designer Michael Eisenmann in a joint effort with the Hughes & Kettner team

• Choice materials, handpicked for durability and ruggedness

• Made in Germany to the most discriminating standards for quality

Specifications:

GENERAL

• POWER AMP: 250 watts

• DIMENSIONS (W X H X D): 350 x 285 x 290 mm

• WEIGHT: 9,85 kg / 21,7 lbs (wood), 10,75 kg / 23,7 lbs. (black)

• TILT STAND (INCLUDED): 25° / 35°

• POLE MOUNT: 35 mm

• PROTECTIVE COVER (INCLUDED): Padded 

CHANNELS (INPUTS)

• CHANNEL 1 AND 2: High Resolution Mic and Instrument Input (XLR/6,3mm (1/4″) combo jack  – Phantom Power switchable))

• CHANNEL 3: Aux In: 3,5 mm (Mini Jack Stereo-Input; adjustable

• CHANNEL 4 / FX RETURN: 6,3 mm (1/4″) Stereo-Input; adjustable

OUTPUTS

• DI-OUT: XLR; Pre/Post EQ switchable; Ground Lift switchable

• LINE OUT: 6,3 mm Stereo Output; adjustable

• CHANNEL OUT: FX Send; 6,3 mm Stereo Output

• OPTICAL RECORDING OUT: S/PDIF TOSLINK, optical

• PHONES OUT: 6,3 mm Stereo Headphones Out

• TUNER: 6,3 mm Mono Tuner Out

CHANNEL 1 AND 2

• SWITCHES:  -10 db; Shape; Mute

• GAIN: Input sensivity

• EQ: 3-Band-EQ, 2 Modes switchable

• INTERNAL FX: 16 FX-Programms (Reverb, Chorus, Flanger, Delay, Combinations), FX parameters adjustable

MASTER

• VOLUME: Master Volume

• NOTCH FILTER: 40 – 180 Hz 

FX LOOP

• FX SEND: 6,3 mm Stereo Output

• FX RETURN: Input: 6,3 mm Stereo Input; adjustable

SPEAKER

• MID/LOW: 1X8″ Custom made 

• HIGH: 1×1″ Dome Tweeter

FOOTSWITCH

• HUGHES & KETTNER FS-2 (OPTIONALLY AVAILABLE): Switching functions: Amp mute, internal FX mute 

INTERNAL FX

1. Reverb Room Dark / Short reverb, heavy HF damping / shorter or longer

2. Reverb Room Bright / Short reverb, light HF damping / shorter or longer

3. Reverb Hall Warm / Medium reverb, warm HF damping / shorter or longer

4. Reverb Hall Bright / Medium reverb, slight HF damping / shorter or longer

5. Reverb Church / Long reverb, slight HF damping / shorter or longer

6. Delay Short / Single echo, slapback at 80 ms / DT: 20 – 170 ms

7. Delay Mid / Multiple repeats, 170 ms / DT: 20 – 170 ms

8. Delay Long / Multiple repeats, 800 ms / DT: 170 – 800 ms

9. Delay Pan Delay / DT: 140 ms + 660 ms / DT: 140 ms + (140-660) ms

10. Delay + Reverb / DT: 170 ms, medium reverb / DT: 20 – 170 ms

11. Chorus / Rate: 0,3 Hz / Rate: 0,1 – 10 Hz

12. Chorus + Reverb / Chorus no. 11, medium reverb, reverb-Level: 80 % / Reverb level 

13. Chorus + Delay / Chorus no. 11, DT: 170 ms / DT: 20 – 170 ms 

14. Flanger / Rate: 0,4 Hz / Rate: 0,1 – 10 Hz

15. Flanger + Reverb / Flanger no. 14; medium reverb, reverb Level: 80 % / Reverb level 

16. Flanger + Delay / Flanger no. 14; 170 ms / DT: 20 – 170 ms   

SALE: $979.99

FREE S&H in continental US (e-mail for international / offshore USA rates)