PRESONUS CDL12P Constant Directivity 2000w Peak Active 12"x 8x2" PA Speaker System Pair

PRESONUS
SKU:
180811
|
UPC:
673454009198
$2,199.99
(No reviews yet)
Shipping:
Free Shipping
Current Stock:
Adding to cart… The item has been added

 CDL12P  PRESONUS 

 2000w Peak Active 12"x 8x2" PA Speaker System Pair 

The PreSonus CDL12 consists of eight 2-inch drivers aligned in a segmented circular-arc high-frequency array centered in front of a 12-inch woofer. The output of the low-frequency driver travels from the same acoustic axis as the high-frequency array so that the pattern always radiates from the center of the CDL12. The CDL12 is ideally suited for a broader range of venue sizes, creating a far-field response almost immediately as the sound is projected from the center of the enclosure.

With the CDL12, the eight 2-inch high-frequency drivers arc over a single 12-inch woofer. The result is better sonic coherence across the entire venue, with no anomalies to compensate for via time-consuming room correction. The CDL12’s integrated PDA-1000 500W x 500W Class D power amplifier features onboard DSP presets to facilitate and simplify arrayed configurations. Comes with a 6 YEAR WARRANTY!

Specifications:

Acoustic Performance

  • Configuration: Active 2-way

  • Frequency Response (-3 dB): 48 Hz – 18 kHz

  • Frequency Response (-10 dB): 42 Hz – 19 kHz

  • Nominal Coverage (-6 dB): 120° x 20° per enclosure

  • Maximum Peak SPL: 131 dB

  • Crossover Frequency: 420 Hz

Transducer

  • LF Transducer: 12” (2.5” voice coil)

  • HF Transducer: 8 x 2” (1” Voice Coil)

Amplifier

  • Type: Class D

  • Total Power Output: 2000W Peak, 1000W Program (500W RMS)

  • LF Power: 1000W Peak, 500W Program (250W RMS)

  • HF Power: 1000W Peak, 500W Program (250W RMS)

  • Cooling: Free air convection

  • Rated THD: <0.05% (20 Hz - 20 kHz)

  • Dynamic Range: 119 dB (A-weighted)

  • Bandwidth: 20 Hz - 20 kHz

  • Mains Connection: powerCON™ In and Out

Connections and Controls

  • Input Channels: 1 Line

  • Input Connector Types: 1 XLR

  • Line Input Impedance: 40 kΩ

  • Maximum Input: +4 dBu

  • Output Connector: Direct Line Out (XLR)

  • Controls: Preset Select / HPF On/Off

  • Indicators: Over Temperature, Signal, -3 dB, Limiter, Clip

DSP

  • Effects: Compression, Limiting, Delay, 8-band EQ and preset selection via WorxControl

  • HPF: 90 Hz, 4th-order Butterworth

  • Bit Depth: 24-bit

  • Sample Rate: 48 kHz

Enclosure

  • Material: 15 mm Eucalyptus plywood

  • Finish: Chemline™ Polyurea

  • Grille: Powder-coated steel

  • Dimensions (HxWxD): 18.6” x 20.8” x 17.5” (473 mm x 529 mm x 444.5 mm)

  • Unit Weight: 65 lbs. (29.5 kg)

Safety

  • Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency

  • Transducer Protection: Limiter

Power

  • AC Power Input: 90-260V~, 50-60 Hz

  • AC Power Consumption: (1/8 Power) 4.2 Amps

Suspension Mounting

  • Rigging Points: Integrated Rigging (10:1 load)

  • Mounting: Dual-position pole mount (0° and 10°) 35 mm

SALE: $2199.99

FREE S&H in continental US (e-mail for international / offshore USA rates)